INDUSTRIES

  • Temperature measuring device

    Temperature measuring device

    ✭ When manufacturing injection-moulded parts from plastics, the mould temperature has a decisive influence on the quality of the parts and the cycle time. Optimum temperature control during the processing of thermoplastics therefore also has a direct influence on the efficiency of the production.

     

    ✭ The injection mould is cyclically heated by the injected material. The heat is dissipated by the thermal conduction in the material and in the steel of the mould to the surface of the temperature control channel, where the heat is given off via heat transfer to the circulating heat transfer medium (water or oil). The temperature control unit dissipates the heat of the heat transfer medium and returns the cooled medium to the circulation.

     

     Our set of molds is made of S136 hardened material, and the life of the mold should reach 1 million times. In the injection molding production process, it is necessary to ensure the accuracy of the product, and ensure that it is stable and firm during the assembly process. Make our electronic part more stable.

     

     If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Coffee machine components

    Coffee machine components

    This plastic part is the main part of the capsule coffee machine, and it is the core part of the capsule coffee machine.

     

    The material used for this plastic part is PA66+45GF, and there are three main plastic parts that need to be assembled with this plastic part. The sliding part of the machine and the disassembly of the capsule coffee are inseparable from this core plastic part.

     

    Its advantages are not easy to deform, good stability, high precision, to ensure that the coffee machine is stable during work and reduce noise.

     

    This mold is our company’s production mold, which mainly provides plastic parts services for our coffee machine manufacturers. The production capacity of this set of molds is 800 per day.

     

    If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • LSR Mask

    LSR Mask

    Due to the high demand for this liquid silicone part, we have made 6 sets of LSR molds for our customers in total. The number of cavities in each mold is 4 cavity, and the front and rear templates are made of S136 hard steel material, and the hardness is HRC48-52 degrees.

     

    Due to strict product appearance requirements, the parting line of the product must be controlled within 0.03mm. Our mold processing accuracy must be controlled within the range of 0.005-0.01mm. and its irregular parting surface, it is very difficult for our mold manufacturing. We must ensure that our processing equipment and technology can meet customer requirements. Through 35 days of processing and manufacturing, our mold testing was very successful, and our customers immediately put into mass production.

     

    If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Chair plastic cushion

    Chair plastic cushion

     In addition to the design and appearance of the cushion of a plastic chair, its quality is also very important. The plastic material we use is PP+20GF, which has good toughness and excellent compression resistance.

    ✭ The mold of this plastic part uses NAK80 mold steel, which has good polishing performance. In order to get a high-quality surface effect and a good texture surface, NAK80 material performs very well. The life expectancy of this model is up to 500,000 times. The water transportation design and strength of the mold are all designed and manufactured on the basis of this life.

     The product injection cycle is 42 seconds, and the daily production capacity can reach 850. The short manufacturing cycle has also greatly reduced the cost of the product, and has won more profit margins for our customers.

     If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Car Parts Mould

    Car Parts Mould

      This plastic part is a part of a car from a French customer. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.

     

      The mold structure is relatively simple, with two Lifters structures. The product material is PA66+30GF, and the surface needs to be polished #600. The mold de

    livery time is 35 days, and the injection cycle is 32 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the French injection molding factory.

     

      If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.

  • 7day plastic pill box

    7day plastic pill box

      7 days * 7 storage pill box 49 moisture-proof boxes of individual medicines can fully meet your daily needs even when traveling.The rainbow colors each day are marked separately on the lid so that you can easily distinguish what you want.The sturdy and durable food-grade plastic lid will stay tight as long as you close it and no longer pop-open. There is no medicine scattered in the accident or impact.The unique cylindrical appearance design saves space, unlike other rectangular hollow part pill boxes, which can hold some small appliances.

     

      For example, Pill CUTTER.Size 22.5 x 6 X 27 cm Each small box measures 1.06 inches * 0.23 inches * 0.86 cm, big enough for different sizes

    This plastic part is a part of a Oil filters Plastic ccessories from a USA customer. This set of molds adopts the DME standard. The Core material is S136 hardened steel.

     

      The mold structure is relatively simple, with two Becu core inserts structures. The product material is PP, and the surface needs to be Polish-#600. Product size accuracy requirement is +/-0.1. The mold delivery time is 35 days, and the injection cycle is 35 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the USA injection molding factory.

     

    ✭  If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Insulating Bobbin

    Insulating Bobbin

     

    ✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.

     

     This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.

     

    ✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.

     

     If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Angle buffer

    Angle buffer

      This is an Angle buffer plastic part for Volkswagen, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +150 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.

     

      This product is used in the support position of auto parts to make some parts of the car stable and reliable. This set of molds adopts the HASCO standard. The Core material is 1.2344 (ESR)hardened steel.

     

    ✭  The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-21. Product size accuracy requirement is +/-0.05. The mold delivery time is 30 days, and the injection cycle is 30 seconds. The mould use INCOE hot runner into cold runner for sub gate. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.

     

      If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Medical stress relief guide tube

    Medical stress relief guide tube

     Our company is very experienced in the field of plastic molds for medical catheters. Not only mold manufacturing, but also medical-grade injection molding. The plastic material used in this medical catheter is very expensive and requires very high quality molds. The inner hole of the product is only 1.27mm in diameter. Our mold inserts are made of SKH51 high-quality material. This material can ensure the tolerance of the small holes and ensure the service life of the inserts pin.

     

     

     The plastic material of this catheter is a 65-degree soft material. During the injection molding process, it is difficult to demold. Through our technological improvement, our current mold production is smooth and the injection cycle is shortened. At present, our injection molding cycle is 16 seconds, which saves delivery time and cost to our customers.

     

     

     Our set of molds is made of S136 hardened material, and the life of the mold should reach 1 million times. In the injection molding production process, it is necessary to ensure the accuracy of the product, and ensure that it is stable and firm during the assembly process. 

     

     

     If you have similar products, Please do not hesitate to contact us. We will be your best partner.